Welcome to MECCANOMAN,   We are now CLOSED to process orders. Our next open time will be advised here, soon.

World Wide, Min/Max orders, £15 to £500 (goods). Mid day too  We take payment by Bank Transfer, UK cheques, Paypal, or Cash when collecting orders from Dunmow Essex. We may ask for bank transfer on some high value orders.

Please note; We have Pre-war colours. E.g. Blue/Gold, Nickel, Dark Red/Green. ANDLight Red, Light Green, Dark Blue, White and the Yellow's, are usualy GOOD to MINT!  And often cheaper.... 

LOOK OUT FOR:  "Daves   "LOTS",(now up to 260, take a look!). "TREASURE" (Now two more Lucky Dip's - the lowest prices ever!!)  "Bulk Bundle Savings"  and  bargain "Used 2nd   quality"  parts! see below   

  We have now been Trading 35 years, and since opening our website, we are over whelmend, So I have to limit opening times. Thanks for your patience. Since 2022, I'm thinning my own lifetme collection.   

Some stocks, for a while, have been reduced, like Large Circulars. where they have accumluted.  (Many are are mint) Look out for them!   Don't forget  American Erector. It's compatible with Meccano, useful and afordable. Search "Erector" to find it.

We have loads of BRACED GIRDERS, MOSTLY MINT, to V.G. Take advantage from bulk Bulk purchase. 

 We have lots of  BAYKO  Buy £50 and we add £5 worth (our choice).

 

Shipping & Returns

DELIVERY

We usually dispatch orders 1-7 working days from receipt, but please be patient as processing orders is a one man operation and sometimes we can be very busy. Also, there may be delays during holiday periods.

For security, the shipping address should NOT be a Post Office Box No’s, or Collection Points. If that’s a problem please email us.

Please note: we always obtain proof of postage, but once in the hands of the carrier we have no further control and therefore cannot accept responsibility for delay, damage or loss. In the case of insured orders we will dilligently make a claim if necessary on behalf of the customer and pass on the full amount of any compensation received. However please note that Royal Mail and other delivery services always seek to impose restrictions on claims eg; limiting to cost/trade price of goods only, no taxes, no other charges of any sort covered etc. Therefore any claim, if and when settled, will usually be less than the total cost the customer has paid. Until a claim has been settled, we regret we cannot replace a delayed, damaged or lost order without a full payment for goods, postage, insurance and Paypal etc as appropriate.

RETURNS
Should any item not be to our specified quality (See product information), please always contact us in the first instance, before returning for replacement.

Regretably, as a small business, we are unable to accept returns on correctly supplied goods. However, at our sole discretion, we may consider returns from longstanding, regular customers who make a request within 7 days of receipt of the goods. In which case we will credit against new orders the goods value only, less a 15% restocking charge provided they are returned by the purchaser at their expense in the same condition as supplied.

Parts designated 2nd quality cannot be accepted for return, unless they are physically (not cosmetically) defective. Mixed 2nd quality parts are not accepted for return under any circumstances. 

Please note: We are not normally able to refund postal charges.

UK SHIPPING
UK shipping is automaticaly worked out at 10% of the total value of your order plus £1.50 (up to a £29.95 maximum) plus a small charge for packing where aplicable.
Orders above £100 goods value are usually insured at no extra cost.
Orders below £100 can be insured for £5 (this can be selected during the checkout process).

Very occasionally, if an order consists largely of heavy/low value parts, the postage cost can substantially exceed our P.P. formula. While we will absorb small amounts of extra postage, we will advise if any extra payment is needed.

If you are not using card/Paypal please send a cheque or P.O. to;-
D J Taylor, The Groves, Clapton Hall Lane, Great Dunmow, ESSEX, CM6 1JE
Please include the order number, your name, address, email and telephone number.

COLLECTION
We usually trade at the following clubs & exhibitions where pre-paid orders can be collected, saving postal charges; NELMC (Hainault), Runnymede (Chertsey), SELMC (Falconwood), HSME (Henley) and TIMS (Telford). Plus anual exhibitions at Skegness, Eltham, Telford, Henley, Hainault and Liecester.
Customers are also welcome to collect orders from Great Dunmow by appointment.

If you wish to collect your goods please be sure to select "Collection" from the shipping options in the checkout and to specify where you would like to collect your order from in the comments box.

We can accept a pre-paid cheque for "collected" orders if there's enough time for them to clear, otherwise we require cash on collection please. If you opt for the latter, don't send a payment, though on large orders we may ask for a nominal deposit.

OVERSEAS ORDERS
Shipping is charged AT COST* (by the most appropriate service) plus £2.95 and a small packing charge where appropriate.
(*We generally quote Royal Mail Airmail/Parcelforce Global Value standard prices. Sometimes we use other established carriers where there is a better/quicker service available at no extra cost).

The preferred payment method is Credit Card or PayPal. (We do not charge a surcharge).

Simply proceed with your order online to make a payment for the goods only. We will contact you with the shipping cost when the parcel is ready.
Shipping on orders over £100 is usually insured. If you require shipping insurance on orders of under £100 (though this is often relatively expensive) please specify in the comments box during the checkout stages and we will include this in the final tally.

The extra payment for shipping can then be paid via Credit Card or Paypal.
When advised shipping payments should be made via our "make shipping payment" page. (This facility can be used for other miscelaneous payments as well).  


Occasionally, on very large orders, or to new customers, we will ask for payment by bank transfer.

 

 

 

 

 

Continue

 
Use keywords to find the product you are looking for.
Advanced Search
1 x (27fx) 1" Multi-Purpose Gear, Tri-Axle Type, Plastic
1 x (26) Pinion 19t 1/2"d x 1/4"wide, Solid Brass, NICKEL.
1 x (256b) 5/16" Axle Rod, 5-1/2", BLACK STEEL
1 x (1023-37x) Double "U" Angle Girder, 37h ZINC
1 x (167e) Large Tooth Rack, 6-1/2", 16DP
1 x (Bayko 18) Pinnacle platform, RED
1 x (Bayko 12) Steps. GREY
1 x (120e) Mini Shock Absorber Pin (Plastic)
1 x (NC1) The Products Of binns Road (A General Survey) Vol 1 By Pet
1 x (119) CHANNEL SEGMENT, NEW, SET OF 8, UNUSED RED
1 x (X407) "X" Series Perf. Strip, 3/4" x 2-3/4" GREEN
1 x (Bayko 39) Brick, Side, RED
1 x (EBG4) ERECTOR BRACED GIRDER 4h
1 x (242g) Obtuse angle Girder, 11 Hole, GREEN
1 x (150) Crane Grab, Original
1 x (6920-05) Steel Ladder, 2-1/2" x 1" Wide, 5 Hole
1 x (280a) Narrow Flat Girder 3 hole RED
1 x (147a) Pawl, Bossed, Std RH, Black, Korean War
2 x (MCA/C) c1990 Meccano Catalgue, Atlascraft Period.
1 x (315a) 3-Flat Axle Rod (French) 4-1/2"
1 x (175) Flexible Coupling
1 x (122) Loaded Sack, Pre-War.
1 x (25b3p) 3-Flat Axle Pinion, 12 Teeth Plastic
1 x LOT 0074 - MECCANO ORIGINAL SMALL STORAGE TIN. 2-1/4"square with good original labels. For 144 nut & bolts.
1 x (252) Aluminium Pendulum Rod, 9" (Clock Kit)
1 x LOT 0006 - Meccano Pt. 61 Windmill Sails (4) Black /Yellow, Double Sided.
1 x (X404) "X" Series Perforated Strip, 3/4" x 5-1/4" GREEN.
1 x (161ux) (2) L Girder 2X2 (not as pic). 49 Hole SS
1 x (143f) Flat Ring, 10-7/8" O/Dia, 8-3/8" I/Dia, RED
2 x (NC3) Hornby Dublo Trains (NOT FOR CHECKOUT)
1 x (155) Rubber Ring, 1" Dia, Black
1 x (27b) Gear 133t, 3-1/2" Dia, with extra 16 holes at 3" PCD.
1 x (129) Rack Segment, Repro, Plated.
1 x (MC1996) 1996 Full Meccano Catalgue, Metal/Plastic
1 x (MPL7) Meccano Parts Leaflet, Colour Illustrated, 1970 Original
1 x (142p) Tyre, For 187bm, 1-1/2" Dia x 5/8", For A042 Rims
2 x INTERNATIONAL MECCANOMAN MAGAZINE (NOT FOR CHECKOUT)
1 x (531) Wiper Arm, 1"
1 x (DP30.20) 30DP System, 20 Teeth Pinion, 2/3" Dia x 1/4" Width
1 x (Bayko F13X9) Floor 13 x 9 Hole, BAKERLITE
1 x (M70/1) 1970-77 Meccano Set 1 Original Folded Model Leaflet
1 x (211-13) RH Helical Gear, 13 Teeth
1 x (MC1997) 1997 Full Meccano Catalgue, Metal/Plastic
1 x (146a) Circular Plate, 4" Dia, new, BLUE
1 x (4110-96a) GEAR RING FOR 4110-96 RING. 16DP
1 x (50p) Slide Piece, Plastic, With Brass Boss (Meccanoids)
1 x (120d) Shock Absorber, Complete
1 x (161s) L Girder, 31 Hole, GREEN
1 x (A047Lx) Flexible plastic Caterpillar Track, 13" (total) x 1/2"
1 x (MJE9) Meccano & Junior Meccano Engineer, Bagain Selection 5 Dif
1 x (M70/1-6) 1970-77 Meccano Sets 1-6 Combination, Original Manuals, Black/Yellow Cover
1 x (27d) Gear 60 Teeth. 8 Hole. NICKEL
1 x (Bayko 37) Crazy Paving, GREY
1 x (MC6D) 6 Different (our choice) Full Meccano Catalgues, Metal/Plastic 1993-2008
1 x LOT 0026 - MECCANO Pn. 167b LARGE FLANGE RING. ORIG DARK BLUE 1978/9
1 x (120f) Nikko/Meccano Suspension Unit, Small
1 x (506a) Insulated Flat Girder, 4 Hole
1 x (Bayko 35) Corner Brick, RED
1 x ***(PM3) 2 Kilo (packed) 2nd Quality, Mixed common Parts (No Nuts/Bolts).
1 x (M78/1) 1978/9, Set 1 Original Manual
1 x (532) Wiper Arm, 1-1/2"
1 x LOT 0075 - MECCANO ORIGINAL SMALL PARTS TINS. Two diferent.
1 x (130a) Single Eccentric
1 x (540r) Red Lamp
1 x (99d) Single Braced Girder, 37 Hole, LIGHT YELLOW
1 x (138) Ships Funnel, Vertical, Orig. Red, repainted RED
1 x (MC2003) 2003 Full Meccano Catalgue, Metal/Plastic
1 x (M/MOT6) 1998 Helicopter "Supermodel Leaflet" from 6 Combined 1 Model Motion Sets
1 x (M78/EM) 1978/9, Original Extra Models Sheet Issued With Sets
1 x (25c) Pinion 25t, 3/4" Dia x 3/32" Wide, Brass (not as shown)
1 x (97) Single Braced Girder, 7 Hole, Light Yellow
1 x (520) Rectangular Coil
1 x (8) Angle Girder (Bulk 10) 25h Orig, LIGHT GREEN 2nd Quality.
1 x (99d) Single Braced Girder, 37 Hole, UK YELLOW
1 x (211a) RH Helical Gear, 14 Teeth
1 x (MMC4) 4 Different "Mini" Meccano Catalogues, 90s/00s
1 x (256a) 5/16" Axle Rod, 6-1/2", BLACK STEEL
1 x (NC8) The Hornby Companion (Literature) (NOT FOR CHECKOUT)
1 x (P53) 5 Hole Strip
1 x (180) Gear Ring, 133/95t 3-1/2" Dia, ORIG PRE WAR BRASS PLATED. Reas. condition.
1 x (30a) Bevel Gear 16 Teeth, 1/2" Dia, Use With 30c
1 x (62g) Single Arm Crank, No Boss
1 x (DP30.25) 30DP System, 25 Teeth Pinion, 5/6" Dia x 1/4" Width
1 x (126) Trunnion, Original Med. Green, Used, Reas. condition
1 x (194e) Plastic Plate, 11 x 5h, Slot ends, RED,
1 x (108) Corner Gusset, DARK BLUE (rare) slight marks one side only
1 x (226a) Triangular Transparent Plate, 5 x 7 Hole
1 x (160d) Channel Bearing, 2x3x2 Hole x 11 Hole Long, COPPER
1 x (194e) Plastic Plate, 11 x 5 Hole, WHITE
1 x (194c) Plastic Plate, 9 x 5 Hole, used, BLUE
£486.87